Looptelecom

Loop-IP6416 IP-IMUX

	1U height, full front access(ETSI) unit or front and back access(ANSI) unit
	Rack mount, wall mount, and stand-alone
	WAN Ports -Up to 16 E1/(T1) (4 slots, 4 E1/(T1) ports per hot plug in card) -E1/T1* is software configurable
	Tributary Ports -Fixed on main board - Up to 4 10/100 Fast Ethernet(FE) -Optional daughter card fixed on panel - 1 Optical FE* - 1 Optical FE(SFP housing)* - 2 combo Gigabit Ethernet(GbE)* with 2 RJ45 and 2 SFP housing - 1 DTE(V.36)* and 1 asynchronous RS232. DTE optional interfaces can be either V.36/RS449, V.35 compatible,* EIA530, or X.21
	Power modules -Hot-swappable -48 Vdc plug-in modules (-36 to -75 Vdc), dual for redundancy -AC plug-in module(100 to 240 Vac), dual for redundancy(ANSI only) -AC and DC(coexistent) fixed module(100 to 240 Vac and -36 to -75 Vdc)
	WAN link with virtually concatenated n x E1/(T1), where n can be 1 to 16*
	Encapsulation protocol: GFP, LAPS and PPP(without LCP)
	Differential delay, up to 256ms for E1 and 384ms for T1*
	VLAN packet transparency -Packet size up to 12,000 bytes -IEEE 802.1ad Q-in-Q
	Timing sources for primary and secondary clocks are any one of E1/(T1), DTE**, internal, external (manufacture option)
	Alarm relay
	Firmware download to local unit and remote unit
	Management port and interface -LCD with keypadon ANSI front panel -Console port, VT100 menu-driven -SNMP port -SNMPv1 -Telnet via SNMP port -LoopView GUI EMS -Inband management in traffic bandwidth
	RoHS Compliance Product

The Loop-IP6416 IP Inverse Mux is a media converter. It allows service providers to offer Ethernet services over the existing copper infrastructure and a typical SONET/SDH platform at the central office. The Loop-IP6416 has many unique features. When a line card is enabled on the Loop-IP6416, the CPE maps Ethernet frames EIA530/V.36 and RS449 into bonded PDH signals. Connectivity is provided from tributary traffic to E1/T1 WAN through multiple E1/T1s (up to 16 E1/T1 links). The Loop-IP6416 offers up to 16 E1/T1 ports with an LED for each port. It has automatic E1/T1 channel failure detection and can re-assign the number of E1/T1 channels transporting Ethernet traffic. For example, if there are 16 E1s configured for 10/100 Ethernet traffic transport, and one E1 fails during service, the other 15 will pick up the entire load. This minimizes the loss of IP packets