Looptelecom

Loop-H3300-3S G.SHDSL Stand Alone

No title

* 1-pair/2-pair/1+1 G.SHDSL mode selectable

* 1 pair G.SHDSL.bis

* Dying Gasp report function on 2-pair G.SHDSL Mode (manufacture option)

* STU-C(master) or STU-R(slave) mode selectable

* E1 (120 ohm) /T1 software configurable

* Support router or bridge mode

* Built in self-test, loopback and QRSS functions interface hybrid co-existence in one chassis

* Local/remote management through console port, LAN,
or WAN

* Log-in and password security protection

* VT100 Firmware Download

* Support configuration upload/download

* SNMP and Telnet are supported

* Multi-color LED indicators

* Optional front panel keys and 2-line by 16-character LCD display

* Standard compliance:

* G.SHDSL: ITU-T G.991.2 Annex A,B

* G.SHDSL.bis: ITU-T G.991.2 Annex F

The Loop-H3300-3S is an addition to our H3300 family of CPE products that are based on the G.SHDSL transmission standard. They use the standard 16/32-TCPAM line format over twisted copper pairs to provide digital transport for a variety of data formats and data rates.

The distances that this technology can span without repeaters are dependent on the data rate. Loop-H 3300-3S provides high speed transport for a T1/E1 link plus an additional Ethernet bridge, V.35 data transport over one (1) or two (2) twisted copper pairs.

The H3300-3S works as a pair (as a master and a slave) or as a slave unit to the either one of the two master units: AM3440’s G.SHDSL card, H3300 rack and H3300-3S standalone.

The Loop-H3300-3S can be configured as a master or slave or as the slave side of the G.SHDSL link with the other master being the AM3440’s G.SHDSL card, H3300 rack card, or H3300-3S standalone unit. The master unit is usually located in central offices and is usually a rack-mounted model. The slave unit is usually located at customer's premises and is usually a stand-alone model.